Palmer 19" DI box, 4 channels, active PBRIDGE4A
BRIDGE 4A
19" DI box, 4 channels, active
Description
BRIDGE 4A
Are you aiming to capture the pure signal from a guitar, bass, or keyboard without any noise and tonal loss, even over long cable runs? In that case, you need a DI box - and a high-quality one at that - to ensure your sound won't be compromised.
The BRIDGE 4A from Palmer is a 4-channel, active DI box in 19" rack format for feeding the unbalanced and high-impedance signals of electric instruments such as guitar, bass, keyboard or synthesiser into the microphone inputs of a mixing console. It provides a transformer-balanced, low-impedance signal at the outputs and eliminates mains hum and interference caused by ground loops. This keeps the sound unadulterated: brilliant, low-noise and without interference.
Each channel is equipped with a 6.3 mm jack input, a THRU-Out (for forwarding the input signals to an amplifier, for example), and two transformer-balanced XLR outputs - one at the front and one at the rear.
Thanks to a switchable 30dB pre-attenuation, the BRIDGE 4A can be fed with extremely high input levels in addition to line signals, which means it can even be looped in between the amplifier output and speakers, for example. The Audio-Over-Cat output enables the signals of all 4 channels to be routed via a single Cat (Cat5e or higher) cable. This saves material, space and time. The active circuit leaves the frequency response unaffected, achieves a high dynamic range and delivers a higher output level than a passive DI box.
The BRIDGE 4A is the ideal solution for audio technicians, semi-professional and professional musicians as well as recording studios that value reliable and durable products.
Item highlights:
Balancing and impedance matching for guitar, bass, keyboards & synthesizers
Eliminates ground loop hum thanks to galvanic transformer isolation
4 independent DI boxes in a solid 19" housing (1U)
Higher output level than a passive DI box
THRU-output for passing the input signal
Audio over Cat output (AES72 Type 5e) for forwarding all signals via a single Cat cable
Pure and unaltered low-noise audio
Handles even high-level inputs without distortion thanks to switchable -30dB pad
Ground-lift switch for each output
Power supply: 9V DC, center negative
Engineered in Germany
Specifications
Expand all
General data
Product type
DI boxes
Type
active
Transformer isolated
yes
Channels
4
Inputs
4
input type
unbalanced
Input connectors
6.3 mm jack
Input pad
0 dB / 30 dB
Number of outputs
4 (+ 4 parallel XLR outs + AoC)
THRU outputs/channel
1
Output type
balanced
Output connectors
XLR, RJ45
Cabinet material
sheet steel
Width
482 mm, 19 "
Depth
90 mm
Height
44 mm, 1 U
Weight
1,96 kg
Ground lift switch
yes
Operating voltage
9 V
Power consumption
2 W
Additional Features
AoC output with ground lift, power LED
Ambient temperature during operation
-20 - 70 °C
Relative Humidity
< 80 %, not condensing
Accessories (included)
external power supply PW9VA
